Pelican 1510 Custom Foam Insert
The Pelican 1510 is the carry-on case: cameras, drones, pistols and drives all travel in it, and the pluck foam is usually gone within a year. We CNC-cut a Pelican 1510 custom foam insert to the 19.75" x 11.00" interior with a pocket for each item.
Pelican 1510 foam insert, cut to your gear
Routed closed-cell foam holds the shape of each pocket through hundreds of trips, and nothing moves when the case is stood on its wheels. Choose it when your kit is fixed.
- Camera kit – two bodies, four lenses, batteries, cards and a flash
- Two or three pistols with magazines and ear protection for the range
- Drone and controller with batteries, filters and a tablet
Send the Pelican 1510 model number and a gear list, or lay it out in the online designer.
Pelican 1510 interior dimensions for foam
Pelican lists the 1510 interior at 19.75" x 11.00" x 7.60", split as a 1.79" lid and a 5.79" base. The deep base takes a 1" bottom pad plus pockets up to 4" deep.
| Interior (L x W x D) | 19.75" x 11.00" x 7.60" |
|---|---|
| Lid depth | 1.79" |
| Base depth | 5.79" |
How to order Pelican 1510 foam
Pick the case
Open the online foam designer and choose the Pelican 1510 from the list, or type the interior length, width and depth.
Lay out your gear
Drop items in from the gear library or draw each pocket to size. Prefer not to? Send us a gear list and a straight-down photo instead.
Approve the layout and price
The price shows as you build. Nothing is cut until you approve the layout.
We CNC-cut and ship
Cut from closed-cell cross-linked foam on our CNC machine in Pomona, CA.
Ready-made RAGAR insert for the Pelican 1510
Not every Pelican 1510 needs custom pockets. The Pelican 1510 foam insert is a reusable RAGAR insert in a 19.75" x 11.75" footprint sized for this case: you press the blocks apart around your gear, and rebuild the layout any time without cutting. Choose custom cutting when you want CNC-routed pockets for a fixed kit; choose the RAGAR insert when the kit changes.
Pelican foam guides
Pelican 1510 Custom Foam Insert FAQ
Do you make custom foam for the Pelican 1510?
Yes. We CNC-cut replacement foam to the Pelican 1510 interior (19.75" x 11.00" x 7.60") with pockets for cameras, drones, pistols or drives, or as plain layers.
Is there a ready-made foam insert for the Pelican 1510?
Yes. The RAGAR Pelican 1510 foam insert is a 19.75" x 11.75" reusable insert you reconfigure by hand, no cutting needed. Custom cutting is for a fixed kit with CNC-routed pockets.
Does the custom insert work with the 1510 lid organizer?
Yes. Tell us if you run the lid organizer or the factory lid foam and we size the base layers so the case still closes snug.
Need foam that fits now?
Design a CNC-cut insert online in minutes, or shop RAGAR reconfigurable and pre-cut foam. Everything ships from Pomona, CA.
Pelican is a trademark of its respective owner. RAGAR is not affiliated with or endorsed by these brands; names and model numbers are used only to describe compatibility.