Pelican 1750 Custom Foam Insert
The Pelican 1750 is the long case for full-length rifles and shotguns up to about 48.5". We CNC-cut a Pelican 1750 custom foam insert to the 50.50" x 13.50" interior with a pocket for the long gun, a second gun or pistol, magazines and optics.
Pelican 1750 foam insert, cut to your gear
The 1750 floor is 50.5" long and 13.5" wide, so two long guns fit with optics attached when the pockets are routed to their outlines. Closed-cell foam carries the weight without sagging.
- Scoped precision rifle with bipod, magazines and a rangefinder
- Shotgun and a pistol with shells, chokes and ear protection
- Two carbines side by side for a team or instructor set
Send the Pelican 1750 model number and the exact firearms and accessories, or draw the layout in the online designer.
Pelican 1750 interior dimensions for foam
Pelican lists the 1750 interior at 50.50" x 13.50" x 5.25", split as a 1.75" lid and a 3.50" base. A 1" bottom pad and a 2.5" cut layer fill the base under the lid foam.
| Interior (L x W x D) | 50.50" x 13.50" x 5.25" |
|---|---|
| Lid depth | 1.75" |
| Base depth | 3.50" |
How to order Pelican 1750 foam
Pick the case
Open the online foam designer and choose the Pelican 1750 from the list, or type the interior length, width and depth.
Lay out your gear
Drop items in from the gear library or draw each pocket to size. Prefer not to? Send us a gear list and a straight-down photo instead.
Approve the layout and price
The price shows as you build. Nothing is cut until you approve the layout.
We CNC-cut and ship
Cut from closed-cell cross-linked foam on our CNC machine in Pomona, CA.
Ready-made RAGAR insert for the Pelican 1750
Not every Pelican 1750 needs custom pockets. The Pelican 1750 foam insert is a reusable RAGAR insert in a 50.5" x 13.5" footprint sized for this case: you press the blocks apart around your gear, and rebuild the layout any time without cutting. Choose custom cutting when you want CNC-routed pockets for a fixed kit; choose the RAGAR insert when the kit changes.
Pelican foam guides
Pelican 1750 Custom Foam Insert FAQ
Do you make custom foam for the Pelican 1750?
Yes. We CNC-cut replacement foam to the Pelican 1750 interior (50.50" x 13.50" x 5.25") with pockets for one or two long guns, magazines, optics and accessories, or as plain layers.
How long a rifle fits in a Pelican 1750?
About 48.5" overall with foam at each end. Scoped rifles with the bipod folded and most shotguns fit.
Is there a ready-made foam insert for the Pelican 1750?
Yes. The RAGAR Pelican 1750 foam insert is a 50.5" x 13.5" reusable insert you reconfigure by hand around any long gun. Custom cutting is for a fixed layout.
Need foam that fits now?
Design a CNC-cut insert online in minutes, or shop RAGAR reconfigurable and pre-cut foam. Everything ships from Pomona, CA.
Pelican is a trademark of its respective owner. RAGAR is not affiliated with or endorsed by these brands; names and model numbers are used only to describe compatibility.